Carbon Steel Eccentric Butt Weld Reducer | A106 Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
An eccentric reducer enquiry should describe the transition between two pipe sizes and the required relationship between their centres. Begin with a drawing of the selected reducer, then connect its dimensions and material records to the intended pipeline. Clarify the scope of any material-standard reference before using it to assess the finished fitting.
Show the End Pair and Eccentric Alignment
Give the nominal sizes, outside diameters and wall thicknesses of both mating pipes. Request the reducer length and a drawing showing the required end-centre offset and alignment. One size label cannot identify the complete reducer pair. State the planned installation orientation and any flow or drainage requirement that the project needs assessed; have the selected drawing and design review establish the appropriate arrangement for that application.
Clarify the Steel Specification and Manufacturing Record
Name the exact material grade and applicable specification edition. Where A106 is referenced, identify which material or product that reference is intended to cover and define the requirements for the finished fitting separately. Obtain traceable material records and production documentation for the quoted component. If forged construction is required, include that requirement explicitly and request supporting evidence. Define the butt-weld preparation at each end against the corresponding pipe thickness and joint detail.
Establish the Transition's Documented Design Limits
Identify the dimensional and pressure-design standards governing the reducer and completed joints. Provide the fluid, operating pressure and temperature together with fabrication and installation requirements. Ask for records supporting the selected geometry, grade and duty scope. An undefined class number does not establish an operating-pressure rating, and surface appearance does not qualify a coating for service. Complete the enquiry with the approved offset drawing, end pair, walls, material-reference scope, production evidence and documented design limits.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
