SCH80 Carbon Steel Long Radius Butt Weld Elbow
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty3 Yearscustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeBendhead codeHexagon
-
Overall Length1/2" - 12"Height1/2" - 12"
-
Surface TreatmentsmoothPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter1/2" - 12"
-
Pipe Featurescorrosion resistantPipe ClassNot Rated
-
ApplicationConstruction EngineeringThread TypesNPT
This SCH80 carbon steel long-radius butt-weld elbow listing includes XS wording for an oil-piping enquiry. Its actual variant provides a half-inch-to12-inch range. Specify the individual size and actual wall before treating those title references as an accepted component specification.
Allocate XS and SCH80 to the selected pipe size
Request actual outside diameter, wall thickness, bore and tolerances for the chosen nominal size. Confirm how the XS and SCH80 references apply; the listing does not establish universal equivalence or numerical pressure duty. Match both elbow ends to the actual pipe wall and joining requirements.
Agree the required angle, centerline radius and center-to-end dimensions on a drawing. The title supplies long-radius wording but no angle. No exact dimensional standard, WPB grade or seamless process is recorded, so obtain the actual governing specification without importing those claims from another product.
Confirm the butt-weld ends and carbon steel records
Butt Welded/BW wording and Welding connectivity appear beside an NPT table entry. Resolve actual end preparation and mating interfaces rather than assuming a hybrid. Clarify Hexagon and obtain full carbon steel grade, condition, traceability, material certificates and manufacturing evidence for the forged table description.
Overall Length, Height and Mounting hole diameter repeat the shared range rather than measured geometry. Allocate individual dimensions through the drawing and confirm size/wall availability. Define smooth-surface inspection and actual protective treatment, if required; corrosion-resistant wording does not certify oil compatibility.
Approve oil service for the completed piping
Low Pressure and Not Rated leave numerical limits unconfirmed. State the actual medium, pressure, temperature, cycling, loads and corrosion allowance. Obtain complete system acceptance, then agree joining procedure, alignment, inspection, marking, required material/process/dimensional records and quotation scope.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
