A403 WP316L SCH40 Low-Pressure Casting 90-Degree LR Stainless Steel Elbow Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 Yearcustomized supportOEM, odm
-
TechnicCASTINGConnectivityFemale
-
shapeReducinghead codeOther
-
Overall Length4 inHeight4
-
Surface TreatmentOtherPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter0.25 in
-
Pipe FeaturesFlexible, Corrosion-resistant, Chemical Resistant, Uv Resistant, No additional FeaturesPipe Class150
-
ApplicationOtherThread TypesNPT
This A403 WP316L SCH40 90-degree long-radius elbow enquiry needs an agreed supplied-material specification before purchase. The actual choice is Elbow / 10 mm / Carbon Steel. Select the required component and obtain its material documentation before accepting the title's stainless or grade references.
Resolve material and resistance requirements
Request the accepted material designation, edition, grade, product condition and inspection traceability. Casting wording requires evidence appropriate to that selected material and production route. Dark or bright appearance in the reference images cannot establish composition, grade or manufacturing compliance.
Define the actual fluid and any relevant concentration, temperature and exposure conditions. Flexible, corrosion-resistant, chemical-resistant and UV-resistant labels provide no quantified performance on their own. State the acceptance criteria required by the project instead of assuming suitability for an unspecified application.
Dimension the SCH40 long-radius elbow
Identify what the 10 mm label measures and show both ends on a drawing. Specify the requested 90-degree angle, centerline radius, center-to-end dimensions, bore, wall and tolerances. SCH40 needs the accepted nominal size and dimensional standard before a wall value can be established.
Reducing shape wording requires separate inlet and outlet dimensions. The 4 in overall length, unitless height 4 and 0.25-inch mounting-hole entry describe other roles; do not substitute them for pipe-end sizes or invent the missing height unit. Define female/NPT features and mating interfaces by the relevant end.
Set a measurable operating duty
Provide pressure, temperature, cycling, environmental exposure and mechanical loads. Class 150 naming needs its governing standard and material-temperature basis, while low-pressure wording gives no numerical limit. Confirm the intended application, installation and inspection requirements, requested OEM or ODM scope, and the stated one-year warranty terms with the quotation.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
