Grade 6 A333 ERW Pipe for Low-Temperature Enquiries
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
InvoicingBy Actual WeightOiled or Non-oiledNon-oiled
-
Section ShapeRoundSurface TreatmentCold Rolled
-
Tolerance±1%Alloy Or NotNon-Alloy
-
ApplicationFluid Pipe, Drill Pipe, Hydraulic Pipe, Gas Pipe, Oil PipeCertificateAPI , ISO 9001
-
Delivery Time8 ~ 14 daysGradecarbon steel
-
Outer Diameter219 - 1066 mmSpecial PipeAPI Pipe, Other, EMT Pipe, Thick Wall Pipe
-
StandardASTMTechniqueERW
This Grade 6 A333 ERW pipe is listed for low-temperature pipeline enquiries with cryogenic wording and a B36.10 dimensional reference. The source identifies carbon steel and ERW manufacture. Confirm the selected material condition and actual service temperature before treating the listing as acceptance for a cryogenic system.
Establish the required temperature and material evidence
Provide the intended fluid and full operating temperature range, including the project minimum, with pressure and cycling requirements. Low Temperature and Cryogenic in a title supply no numerical limit. They do not demonstrate suitability for every low-temperature medium or operating condition.
Request the applicable A333 edition, full Grade 6 condition and selected manufacturing scope. Obtain traceable chemistry, property and inspection records, including the low-temperature tests and acceptance evidence required for the proposed supply. The ERW weld and intended joints need assessment within that documented project basis.
Select dimensions against the relevant reference
Outside diameter is recorded as 219–1066 mm. The two variants pair a 6–20 mm thickness range with 12 m or 6 m length. Specify one actual diameter, wall, length and end configuration, then confirm the relevant B36.10 edition and dimensional applicability.
A wall range does not identify a schedule or establish every available combination. Define the measurement controlled by ±1% and agree dimensional, geometry and weld inspection requirements. Check the cold-rolled, round and non-oiled supply condition; no additional protective coating is established by those entries.
Complete the pipeline acceptance and certificate review
Include mechanical loads, joint requirements and project rating evidence with the operating envelope. Agree selected tests and traceability before acceptance. API and ISO 9001 labels require actual certificate scope and validity checks. EMT wording does not establish conduit qualification or alter the evidence needed for the low-temperature pipeline duty.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
