ASTM A234 WPC Mild Steel Reducer, Forged Welded Pipe-Fitting Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty3 Yearscustomized supportOEM, odm
-
TechnicForgedConnectivityWelding
-
shapeReducinghead codeOther
-
Overall Length1/2"-4"Height1/2"-4"
-
Surface TreatmentPolishedPressureLow Pressure
-
System of MeasurementMetricMounting hole diameter1/2"-4"
-
Pipe FeaturesCorrosion-resistantPipe ClassOther
-
ApplicationOtherThread TypesNPT
This ASTM A234 WPC mild-steel reducer enquiry requires an accepted material and manufacturing basis for the supplied transition. Keep the WPC designation explicit when requesting documentation, then establish the complete geometry and joining requirements for the actual pipework.
Accept the exact grade and production route
Obtain the applicable specification, accepted grade, product form, delivery condition and traceable inspection records. Mild-steel and Carbon Steel naming do not certify composition or establish an interchangeable grade. A similar-looking designation should not replace WPC without acceptance.
Clarify whether Welded describes the body manufacturing route separately from installation welding. Forged naming needs actual production and inspection evidence; a welding connection alone cannot establish how the reducer body was made.
Define the selected DN end pair
The actual variants are Reducer / Carbon Steel / DN150, DN125 and DN100. Select one listed choice, then specify both end sizes and the nominal-size basis. Each single DN label leaves outside diameters, bores and wall thicknesses to be documented.
Require overall length, transition profile, alignment and tolerances, with concentric or eccentric arrangement and orientation stated explicitly. Repeated inch ranges for length, height and mounting-hole diameter cannot establish selected DN geometry. The two viewed workshop and paired-reducer references cannot certify supplied WPC grade, size, alignment or manufacture.
Confirm joining and numerical service
Agree the actual delivered joining system and mating-pipe fit, including relevant welding preparation or thread details. Polished and corrosion-resistant descriptions do not identify protective chemistry or compatibility with every process fluid.
Low Pressure remains qualitative, and Other class/application wording does not define numerical limits or the intended installation. Provide medium composition, pressure, temperature, cycling, flow and mechanical loads. Submit the accepted WPC material/manufacturing documents, complete both-end/alignment drawing, surface requirements and inspection criteria together for review of the assembled joint.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
