Grade C Carbon Steel Pipe for Hydraulic and Oil Use
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
InvoicingBy Actual WeightOiled or Non-oiledNon-oiled
-
Section ShapeRoundSurface TreatmentCold Rolled
-
Tolerance±1%Alloy Or NotNon-Alloy
-
ApplicationFluid Pipe, Drill Pipe, Hydraulic Pipe, Gas Pipe, Oil PipeCertificateAPI , ISO 9001
-
Delivery Time8 ~ 14 daysGradecarbon steel
-
Outer Diameter219 - 1066 mmSpecial PipeAPI Pipe, Other, EMT Pipe, Thick Wall Pipe
-
StandardASTMTechniqueERW
This hydraulic and oil pipe enquiry carries a Grade C reference under A106, together with ERW and thick-wall wording. The table identifies round, non-alloy carbon steel and cold-rolled processing. Confirm the selected specification, material and production records before relying on the title for a pressure application.
Verify the stated grade and manufacturing scope
Ask the supplier to establish how the relevant A106 edition applies to the actual pipe offered with an ERW designation. Obtain the grade, condition, chemical and mechanical records and required inspections. The title does not justify changing the documented manufacturing route to seamless or assuming conformity without supporting evidence.
Clarify the relationship between cold processing and ERW manufacture for the selected supply. The Grade C wording needs traceable material documentation rather than a generic carbon steel entry. API and ISO 9001 labels also require actual documents showing applicable scope; they are not independent product certification evidence.
Specify the hydraulic and oil service dimensions
Length choices are 6 m and 12 m, with a 6–20 mm thickness entry and a listed 219–1066 mm outside-diameter range. Select an exact diameter, wall and length combination. Establish bore dimensions, wall distribution, straightness and ovality requirements for the intended installation.
Define the dimension covered by ±1% and the acceptance measurement method. Thick Wall does not provide a pressure calculation, and a broad thickness range does not establish a particular finished bore. Request any necessary cleanliness, surface finish or additional processing as explicit purchase requirements.
Assess pressure, temperature and supply conditions
Provide fluid composition, contamination, operating pressure, temperature, cycling and external loads for material and joint review. Elevated-temperature wording supplies no allowable limit. Agree tests, traceability, non-oiled preservation and storage arrangements, then reconfirm availability, the 8–14-day delivery entry and actual-weight invoicing for the selected pipe.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
