ASME A105 Forged Ball Valve Enquiry for Oil & Gas
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
applicationGeneralBall MaterialCarbon Steel
-
Connection TypeflangemediaBASE
-
Port Size1/4in - 4instructureControl
-
model numberball valveConnection Size1/4in - 4in
-
customized supportOEM, odmFlow Rate0-100L/min
-
For Maximum Pipe Size4in(10.16cm)Operating Pressure900 psi(62.05bar)
-
Operating Temp. Range0~150 Celsiuspowermanual
-
Sealing MaterialPTFEtemperature of mediaMedium Temperature
-
warranty1 year
An A105 forged ball-valve enquiry for oil or gas service needs a selected mechanism, a precise nominal size and a defined operating rating. Identify the governing project requirements before choosing a valve configuration. A broad size description or a pressure value alone does not establish which assembly meets the pipeline specification. The enquiry should bring those details together for one documented model.
Resolve Nominal Size and Valve Mechanism
Request a section drawing that establishes the operating mechanism of the proposed valve. State the required nominal size and obtain the corresponding port, flange and face-to-face dimensions. Compare those dimensions with the actual mating pipeline drawing. For a large-size requirement, confirm the exact size and model combination rather than assuming that a general range describes every selectable option.
Specify A105 Construction and the ASME Requirement
Identify the exact body material requirement and obtain the associated material documentation. If forged construction is required, have the manufacturing process documented separately. Keep body and ball material specifications distinct. State the applicable ASME standard and edition, the relevant pressure designation and the temperature conditions used for selection. A standard family name needs that specific scope before the proposed assembly can be assessed against it.
Qualify the Actual Oil or Gas Duty
Name the process medium and describe its operating pressure and service temperatures. Include any composition details needed to evaluate seat and seal compatibility. Request the pressure-temperature evidence and sealing specification for the same model shown on the drawings. Complete the enquiry with the selected nominal size, body grade, construction process, standard scope and operating records. Review the full set together so that an isolated table value or photograph marking is not used as the basis for an application decision.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
