ASME B16.9 Steel Butt Weld Concentric Reducer Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentSmoothMounting hole diameter0.2 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
This steel pipe fitting listing can support an enquiry for a concentric reducer connecting different pipe sizes. Begin with a drawing of the requested reducer and identify the exact configuration being quoted. A useful specification describes the transition at both ends, rather than relying on a single size label or a broad material choice.
Describe Both Ends of the Pipe Transition
Provide the large-end and small-end nominal sizes together with each mating pipe outside diameter and wall thickness. Request the reducer length, end dimensions and centreline relationship on the same drawing. Confirm that the selected fitting has the required reducer form before evaluating the dimensional details. For a concentric arrangement, have the drawing establish the required alignment; the general appearance of a tapered fitting cannot establish dimensional tolerances.
Specify the Weld Interface and Manufacturing Route
Define the butt-weld preparation required at each end and compare it with the pipe thickness and joint detail. Name the exact stainless-steel, alloy-steel or carbon-steel grade for the project. Ask for material records and production documentation that identify the manufacturing route of the quoted fitting. If seamless construction is required, include that requirement explicitly and obtain evidence tied to the selected item. Check that the dimensions, material records and fabrication detail all describe one configuration.
Connect the Standard Scope to Actual Line Duty
State the applicable ASME B16.9 edition and required dimensional or conformity scope. Request supporting records instead of treating the standard reference as a complete pressure-design qualification. Describe the operating pressure, temperature and fluid, and identify any flow-transition or installation-orientation requirements for assessment. The completed enquiry should link both pipe interfaces, steel grade, manufacturing requirements and documented design limits so the reducer can be reviewed in the context of the intended pipeline.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
