Carbon Steel Equal Tee for Oil and Gas Branches
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPlainPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This oil and gas branch-connection listing describes a forged carbon steel equal tee with welding ends. The product image supports a tee form, yet the type option reads Reducer. Confirm the final fitting configuration and its role in the pipeline before approving the order.
Define the run, branch and welding ends
Provide the run and branch nominal sizes, actual outside diameters, wall thicknesses and center-to-end dimensions. Check the intended equal configuration against the drawing. A photograph cannot verify equal measured bores or a particular schedule, and the Reducer field must be reconciled with the tee description.
Select the exact combination within the broad 1/2–110 inch option range and confirm availability. Specify bevels, bore alignment and tolerances required by the mating pipe and welding specification. The custom length, height, hole and thread labels do not establish those details or a separate threaded connection.
Review the branch design and material records
Confirm the applicable ASME B16.9 edition and dimensional acceptance for the proposed fitting. The material choices are Carbon Steel and a234wpb; obtain the actual grade, governing material specification, condition and traceability for the selected supply. FORGED wording does not replace manufacturing or inspection evidence.
Describe oil or gas composition, water and contaminants, pressure, temperature and cycles. Include relevant branch loads, supports and project joint requirements. High Pressure wording gives no allowable numerical capacity, and the application reference does not establish sour-service or hydrogen qualification.
Agree the Plain supply condition and acceptance
The table records Plain surface treatment rather than a specified coating system. Clarify the actual finish and preservation needed for transport, storage and installation. Agree required material and dimensional inspections, marking, quantity, OEM scope, warranty terms and delivery timing with the final branch fitting specification.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
