Long-Radius Butt-Weld Elbow for Pipework
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty3 Yearscustomized supportOEM, ODM, obm, odm
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall Length4 inHeight10cm
-
Surface TreatmentPolishingPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter0.2 in
-
Pipe FeaturesNo additional FeaturesPipe Class1000
-
ApplicationBuilding Water Supply And DrainageThread TypesNPT OR BSPT
This B16.9/A403 WP304 long-radius butt-weld elbow enquiry concerns a documented pipe-direction change. Select the required material and geometry before ordering. Standard and grade references in a product name identify requirements to confirm; they do not independently certify the supplied component.
Connect the grade to the selected option
Actual choices are Elbow / 10 mm / Stainless Steel and Elbow / 10 mm / Carbon Steel. Assign WP304 requirements to the intended stainless component, with its accepted material designation, edition, grade and inspection traceability. A carbon-steel alternative needs its own specification rather than assumed WP304 equivalence.
Identify the applicable B16.9 dimensional requirements and request evidence of conformity. Distinguish forged body processing from welded installation attachment when agreeing the production route. Confirm the polished finish and inspection acceptance without inferring corrosion resistance from appearance.
Put the long radius on a drawing
Specify the required centerline radius explicitly, together with angle, center-to-end dimensions, bore, wall and tolerances. No numerical radius multiplier or angle is established by the long-radius wording. Reference photographs show curved fittings but cannot establish the delivered dimensions or grade.
Define whether the 10 mm label is nominal or measured, and identify both pipe ends. The 4 in overall length, 10cm height and 0.2-inch mounting-hole entries concern other dimensions. State butt-weld preparation and any NPT/BSPT feature by the relevant component and end, rather than assuming a mixed-end arrangement.
Document the service envelope
For a building-water or drainage project, provide the actual medium, pressure, temperature, cycling and imposed loads. Class 1000 naming requires its governing standard and material-temperature basis, while low-pressure wording gives no numerical limit. Agree installation and inspection requirements, requested OEM, ODM or OBM scope, and the stated three-year warranty terms in the quotation.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
