Stainless Steel Equal Butt-Weld Tee for WP304 Enquiries
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model numbertee 3698TechnicForged
-
ConnectivityFemaleshapeEqual
-
head codeSquareOverall Length4 in
-
Height4Surface TreatmentPainting
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.25 inPipe FeaturesFlexible
-
Pipe Class125Applicationpetrochemical industry, Shipbuilding, Construction Engineering, Power Industry, Heating Systems, Automotive Repair, Agricultural Irrigation
-
Thread TypesNPT
An equal butt-weld tee request needs a complete description of three pipe interfaces. Stainless Steel and Carbon Steel are separate choices for this product, so a stainless WP304 requirement should remain attached to the intended material and tee configuration.
Define the two run ends and the branch together
Provide the nominal size and actual pipe dimensions at both run ends and at the branch. Confirm the equal-size arrangement on one tee drawing rather than assuming a single selector label defines all three connections. Include the center-to-end dimensions and any layout restrictions around the branch. The drawing should locate the tee within the pipe route and make each mating interface unambiguous.
Specify the preparation at every butt-weld interface
State the required connection form, wall thickness and end preparation for each pipe connection. If any thread or female-end requirement is intended, identify it separately and obtain confirmation for the requested configuration. A general connection label cannot replace the preparation needed at all three butt-weld ends. Keep those details with the tee geometry so the proposed fitting can be reviewed against the actual pipes entering the joint.
Confirm WP304 and the applicable tee standard
For a stainless A403 WP304 requirement, identify the material specification and grade explicitly and request confirmation for the selected tee. State any ASME B16.9 requirement with the applicable edition and dimensional scope. The Carbon Steel choice needs its own grade specification and should not inherit the stainless requirement. Include the medium, design conditions and documentation needed to assess the same tee arrangement before a pressure capability or exact standard match is accepted.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
