API 5L Carbon Steel Pipe for Oil and Gas Transmission
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
InvoicingBy Actual WeightOiled or Non-oiledNon-oiled
-
Section ShapeRoundSurface TreatmentCold Rolled
-
Tolerance±1%Alloy Or NotNon-Alloy
-
ApplicationFluid Pipe, Drill Pipe, Hydraulic Pipe, Gas Pipe, Oil PipeCertificateAPI , ISO 9001
-
Delivery Time8 ~ 14 daysGradecarbon steel
-
Outer Diameter219 - 1066 mmSpecial PipeAPI Pipe, Other, EMT Pipe, Thick Wall Pipe
-
StandardASTMTechniqueERW
This carbon steel pipe listing addresses oil and gas transmission with API 5L grade references and a Grade B A106 entry. The title describes seamless pipe, but the table records ERW manufacture. The actual route needs resolution before either description can become part of the selected supply specification.
Resolve the manufacturing conflict and standard scope
Request a clear statement of the offered manufacturing process with traceable production and inspection records. Do not choose between the seamless title and ERW table solely from their wording. Agree the applicable manufacturing acceptance requirements once the actual route has been established.
API 5L references include Gr B, X42, X52 and X60; A106 also appears with Grade B. Select the required governing document, edition, grade and condition. Those names do not establish equivalent materials or a verified combination of standards, and dual certification requires actual supporting evidence.
Define the complete dimensional selection
The table gives 219–1066 mm outside diameter and a 6–20 mm wall range. The two variants pair that thickness entry with 12 m or 6 m length without assigning a grade or diameter. Specify the exact size and ends, and confirm the complete combination for the selected material.
Identify the measurement controlled by ±1% and agree dimensional, geometry and process inspection criteria. Confirm the cold-rolled, round and non-oiled supply condition with the actual offered pipe. The ranges and finish labels do not demonstrate availability under every grade or an additional protective coating.
Verify acceptance for the transmission duty
Provide oil or gas composition, operating pressure, temperature, cycling and mechanical loads for material, joint and rating review. Obtain material properties, traceability and selected test reports. Actual API or ISO 9001 certificate scope and validity need verification; the application label supplies no numerical rating or sour-service approval.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
