Long-Radius Butt-Weld Steel Elbow Angle and Grade Enquiries
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 yearcustomized supportOEM, ODM
-
model numberelbowTechnicCasting
-
ConnectivityFemaleshapeEqual
-
head codeSquareOverall Length4 in
-
Height2Surface TreatmentPainting
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.2 inPipe FeaturesFlexible, Corrosion-resistant, Chemical Resistant, Uv Resistant, No additional Features, underground rated
-
Pipe Class125Applicationpetrochemical industry, Shipbuilding, Construction Engineering, Power Industry, Heating Systems
-
Thread TypesNPT
A long-radius butt-weld elbow enquiry should name one required angle and one material grade. Define those choices explicitly before confirming the end geometry and construction for a Stainless Steel or Carbon Steel configuration.
Choose the actual turn from the angle requirements
State the required 45-, 60-, 90- or 180-degree turn and provide its centerline radius on a piping drawing. Include both end positions and the surrounding clearance requirements. Confirm the selected angle and long-radius geometry for the material and size being considered. A group of angle labels does not establish a verified angle choice for every variant, and a curved reference part cannot provide measured routing dimensions.
Give the steel specification one precise grade
Identify the applicable material specification and required grade for the elbow. WPB, WP11 and A105 should be stated as distinct project requirements rather than treated as interchangeable names. Confirm the selected grade for the intended steel family and construction. Include any B16.9 requirement with the relevant edition and dimensional scope, so the material discussion refers to the same elbow geometry that the pipe route needs.
Confirm both weld ends and construction together
Provide the pipe dimensions, wall thickness and butt-weld preparation at each end. Identify any female or thread requirement separately and confirm the actual connection arrangement for the supplied part. A seamless-construction requirement should also be confirmed for that configuration, with relevant material and inspection documentation. Include the medium and design pressure and temperature for the rating review. The final elbow request should bring one angle, one grade, both connections and the construction requirement together before service suitability is accepted.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
