ANSI/ASME B16.5 DN150 A106 Carbon Steel CNC-Machined Blind Flange
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
Surface TreatmentCNC MachinedApplicationConstruction
-
Bolt Hole Diameter1/2"~24"Bolt Hole Quantity6
This ANSI/ASME B16.5 DN150 carbon steel blind flange enquiry requires acceptance of the supplied flange material and product form. Treat A106 naming as a specification question to verify with documents before approving the closure or its operating duty.
Confirm the applicable flange material scope
Obtain the governing material document, edition, applicable product scope, grade, condition and traceable inspection evidence. A named designation alone cannot qualify the supplied blind flange. Confirm the accepted specification without substituting another grade automatically.
Carbon Steel and Stainless Steel are separate actual alternatives. Neither establishes a specific grade by itself. CNC-machined appearance also cannot establish material condition, heat treatment, dimensional tolerances or corrosion performance.
Define DN150 closure and exact interface
Twelve actual variants offer six constructions within one 1/2"~24" range. Agree the DN150 nominal-size correspondence and chosen blind drawing. The range is not a discrete inventory list, and weld-neck, slip-on, socket-weld, lap-joint or threaded alternatives do not establish the requested solid closure.
Check closure thickness, outside diameter, facing type and finish, gasket contact dimensions, bolt circle, hole quantity/diameter and tolerances. The repeated Bolt Hole Diameter range and quantity 6 cannot define selected drilling. Two viewed open-bore references, including one with JIS markings, cannot certify B16.5 DN150 blind geometry or A106 material acceptance.
Accept the selected class and construction duty
Agree the B16.5 edition, scope and chosen class with compliance evidence. Pressure-style title wording does not establish a numerical operating limit or discrete class variant. Assess the material-dependent pressure-temperature envelope with the complete mating gasket and fasteners.
For construction use, provide actual medium composition, pressure, temperature, cycling and closure loads. Submit accepted material/product-form documentation, the nominal-size and blind/interface drawing, standard/class evidence, surface requirements and assembly details together. These establish the basis for evaluating installed compatibility and service conditions.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
