A53 Concentric / Eccentric Swage NPT Nipple | Grade B Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 yearscustomized supportOEM
-
model numberDN8- DN300TechnicForged
-
ConnectivityWeldingshapeEqual
-
head coderoundSurface TreatmentSmooth
-
PressureLow PressureMounting hole diameter0.25 in
-
Pipe Class1000PassAPI
-
CertificationGS
A swage nipple enquiry should define the transition between two pipe ends, including their sizes, alignment and connection preparation. For an NPT connection and Grade B requirement under A53, those details need to be recorded for the selected item. Specify the geometry you need and request a drawing that connects the dimensional and material requirements in one fitting specification.
Define the Swage Geometry at Both Ends
State the required large and small end sizes, their wall thicknesses and the overall fitting length. Identify whether the transition must be concentric or eccentric. For an eccentric requirement, show the alignment and any relevant orientation on the drawing. A single pipe-size label does not define both ends of a swage. Compare the proposed dimensions with the two adjoining pipes so that the intended transition is clear.
Identify NPT and Welding Preparation Separately
If the required connection is NPT, specify the thread form and extent at each end and obtain the corresponding end detail. If a welding connection is required, define that end preparation instead. Describe mixed end arrangements individually where needed. Do not treat a thread description and a welding description as equivalent configurations. The selected-item drawing should identify how each end will join its mating pipe.
Confirm Material and Operating Requirements
State the exact Grade B material requirement under A53 and request traceable material documentation for the proposed nipple. Confirm the manufacturing process separately and identify the applicable standard scope. Name the process medium and record the pressure and service-temperature requirements before requesting operating qualification. Complete the enquiry with one geometry, an end-size pair, wall thicknesses, connection details and material records. This gives a defined basis for assessing the fitting against the installation and service conditions.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
