90 Degree Stainless Steel 304 Weld Elbow Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
model number1/2"--72"TechnicPushing
-
ConnectivityWeldingshapeEqual
-
head codeRoundSurface TreatmentPainting
-
Mounting hole diameter0.25 inPipe Class1000
-
StandardASMESizeCustomized Size
-
ColorBalck
A 90-degree stainless-steel elbow enquiry should link the required direction change to one dimensioned fitting. State the grade 304 requirement and identify the individual size before comparing manufacturing or standard references. The selected model's drawing, material record and joint specification provide the basis for reviewing the proposed elbow.
Select One Elbow Within the Stated Size Range
Give the required nominal size and the mating pipe outside diameter at each end. A broad half-inch to seventy-two-inch range does not establish the dimensions or availability of every configuration. Request the 90-degree angle, bend radius and centre-to-end dimensions on the selected drawing. Include pipe wall thickness and the end preparation needed for the planned joints. Check the elbow envelope against installation clearance and the alignment of the incoming and outgoing pipe sections.
Document the Material and Manufacturing Requirement
Identify the material specification and exact grade 304 requirement, then obtain traceable records for the quoted fitting. Define the manufacturing route and any production documentation required by the project. Do not use the visible finish to establish material identity or forming history. Specify any surface treatment independently and confirm that the proposed finish and fabrication requirements belong to the same selected model.
Identify the Exact ASME and Service Design Basis
Name the applicable ASME standard number and edition, together with the conformity records needed for the elbow. A general ASME reference does not define a complete fitting specification. Provide fluid composition, operating pressure and temperature and the fabrication requirements for both joints. Request the documented design scope covering the selected material, geometry and assembly. Complete the enquiry with the individual size, radius, walls, material evidence, manufacturing requirements and qualified operating limits so the elbow can be assessed against the actual line design.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
