80-Inch Carbon Steel Pipe Reducer, ASME/ANSI B16.9 A234 Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty3 Yearscustomized supportOEM, odm
-
TechnicForgedConnectivityWelding
-
shapeReducinghead codeOther
-
Overall Length1/2"-4"Height1/2"-4"
-
Surface TreatmentPolishedPressureLow Pressure
-
System of MeasurementMetricMounting hole diameter1/2"-4"
-
Pipe FeaturesCorrosion-resistantPipe ClassOther
-
ApplicationOtherThread TypesNPT
The 80-inch carbon steel pipe-reducer enquiry names ASME/ANSI B16.9 and A234. Confirm the actual supplied size and applicable document scope before accepting a large-diameter transition or assigning operating capability to the named component.
Confirm supplied size before standard coverage
The actual variants are Reducer / Carbon Steel / DN150, DN125 and DN100. No additional 80-inch actual selection is established by the title. Obtain the exact nominal-size designations and measurement basis for the delivered large and small ends.
Agree the applicable B16.9 edition and component/size scope with dimensional conformity evidence. Repeated inch ranges for length, height and mounting-hole diameter cannot establish both end sizes or measured reducer geometry. A234 naming also needs accepted material scope and documentation.
Define the complete transition and joining system
Specify both outside diameters, bores, wall thicknesses, overall length, transition profile, alignment and tolerances. Choose the required concentric or eccentric arrangement explicitly, including any offset and installation orientation. The single DN choice does not supply that complete drawing.
Both viewed references show dark reducer forms with different apparent alignment. Their shapes cannot certify supplied size, grade, finish or concentric/eccentric delivery. Obtain the accepted end drawing and joining requirements, including welding preparation or thread details matched to the mating pipes.
Document material and operating acceptance
Carbon Steel requires a selected specification, grade, product form, condition and traceable inspection records. Forged needs evidence of actual manufacture independently of installation welding. Polished and corrosion-resistant descriptions do not define surface-protection chemistry or universal fluid compatibility.
Low Pressure provides no numerical operating limit, and Other class/application wording does not establish a selected service. Supply medium composition, pressure, temperature, cycling, flow and mechanical loads. Review actual size and complete geometry together with the accepted standards scope, material/manufacturing and surface records before complete-joint acceptance.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
