API 6D Trunnion Mounted Ball Valve Enquiry
Pour l’approvisionnement industriel
Préparez une RFQ plus claire
Indiquez les éléments ci-dessous afin que RELIA comprenne la pièce et discute avec vous de la prochaine étape.
- Plan, échantillon ou norme de référence
- Nuance du matériau et procédé préféré
- Dimensions, tolérances et finition de surface
- Application, quantité cible et destination
Délais de production, emballage et conditions d’expédition sont confirmés pour chaque projet après accord sur les spécifications et conditions commerciales.
-
applicationGeneralBall MaterialSTAINLESS STEEL
-
Connection TypeflangemediaBASE
-
Port Size1/4in - 4instructureBall
-
model numberball valveConnection Size1/4in - 4in
-
customized supportOEM, odmFlow Rate0-100L/min
-
For Maximum Pipe Size4in(10.16cm)Operating PressureLow Pressure
-
Operating Temp. Range0~150 Celsiuspowermanual
-
Sealing MaterialPTFEtemperature of mediaMedium Temperature
-
warranty1 year
A ball valve enquiry for this listing should connect the required trunnion-mounted design with an identifiable assembly. Establish the exact model before comparing seat construction, body materials or operating limits. A section drawing and model-linked records provide the basis for evaluating the proposed valve against the pipeline specification.
Resolve Seat Construction and Body Process
State whether the application requires a metal seat or a PTFE seat, and request the corresponding seal arrangement. Ask for a section drawing identifying ball support, stem, seats and body joints. Specify body, ball and sealing materials separately; a stainless-steel component label does not identify every wetted part. Obtain material records and manufacturing documentation that establish whether the selected body is forged or cast. Keep these construction decisions tied to the quoted configuration.
Match the Bore, Flanges and Manual Operator
Give the exact nominal connection size and required flow bore independently. Request flange standard, drilling, facing and face-to-face dimensions, then compare them with the mating pipeline. Include installation orientation, surrounding clearance and access for the manual operator. Confirm whether the proposed operator meets the required operating arrangement and whether the drawings show the same assembly as the quotation.
Qualify API 6D Scope and Service Conditions
Identify the required API 6D edition and conformity scope, and obtain the selected model's supporting test records. Describe the fluid composition, operating pressure and temperature together, including relevant operating changes. Ask for a qualified pressure-temperature envelope and assess flow requirements at the intended differential pressure. A broad temperature range, flow figure or qualitative pressure label does not establish this operating envelope. Complete the enquiry with the approved section drawing, interface dimensions, material requirements and documented duty limits.
Informations techniques pour chaque demande produit
Préparez le besoin avant la confirmation finale du produit.
La page produit est un point de départ. Plans, échantillons, interfaces, matières, quantités et réception sont examinés avant confirmation du stock ou de la fabrication.
Discutez de ce produit dans le contexte de votre projet.
Partagez plan, échantillon, référence, quantité et application. Les points inconnus peuvent rester ouverts.
