304 / 316 Stainless Steel Thick-Wall Pipe Fitting Tee Enquiry
Pour l’approvisionnement industriel
Préparez une RFQ plus claire
Indiquez les éléments ci-dessous afin que RELIA comprenne la pièce et discute avec vous de la prochaine étape.
- Plan, échantillon ou norme de référence
- Nuance du matériau et procédé préféré
- Dimensions, tolérances et finition de surface
- Application, quantité cible et destination
Délais de production, emballage et conditions d’expédition sont confirmés pour chaque projet après accord sur les spécifications et conditions commerciales.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class125SizeCustomized Size
-
Product nameElbow
This stainless tee enquiry references 304/316 and Thick Wall, without assigning a measured thickness or wall designation. Its actual variants include both TEE and Elbow. Select the intended fitting type first, then translate the wall requirement into a drawing and inspection specification for that particular choice.
Identify the run and branch on the selected tee drawing
For TEE, record both run ends and the branch with their nominal sizes, outside diameters and walls. Confirm the Equal relationship and branch orientation through the drawing. The photographs show dark tee examples with different apparent branch proportions; they do not prove an actual equal or reducing configuration. An Elbow choice instead needs its own angle, radius and two-end dimensions rather than tee geometry.
Replace the thick-wall label with measurable requirements
State the required minimum or nominal wall, tolerances, measurement locations and inspection evidence for each end and relevant body regions. Thick Wall alone does not establish a schedule, fixed thickness or pressure capacity. Explain the millimetre menu's nominal-size convention and map it to every connected pipe. Customized Size, Hexagon and the mounting-hole field cannot complete the drawing or measured-wall requirements.
Match one stainless grade to every completed joint
Choose either 304 or 316 with complete material specifications, edition and traceability; do not presume equivalence or dual qualification. Alloy and Carbon Steel choices require separate exact materials. Establish the dimensional requirements and actual Welding end details, preparation, alignment and inspection for the selected type. Verify Forged through production records and clarify Painting and joint-zone finish. Pipe Class 125 needs its standard, unit and material/temperature basis. Assess fluid, pressure, temperature, corrosion and branch or pipe loads across the chosen fitting and all adjoining joints.
Informations techniques pour chaque demande produit
Préparez le besoin avant la confirmation finale du produit.
La page produit est un point de départ. Plans, échantillons, interfaces, matières, quantités et réception sont examinés avant confirmation du stock ou de la fabrication.
Discutez de ce produit dans le contexte de votre projet.
Partagez plan, échantillon, référence, quantité et application. Les points inconnus peuvent rester ouverts.
