Carbon Steel SCH40 Seamless Tee
Pour l’approvisionnement industriel
Préparez une RFQ plus claire
Indiquez les éléments ci-dessous afin que RELIA comprenne la pièce et discute avec vous de la prochaine étape.
- Plan, échantillon ou norme de référence
- Nuance du matériau et procédé préféré
- Dimensions, tolérances et finition de surface
- Application, quantité cible et destination
Délais de production, emballage et conditions d’expédition sont confirmés pour chaque projet après accord sur les spécifications et conditions commerciales.
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPlainPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesCustomized SizePipe ClassCarbon Steel
-
ApplicationShipbuilding, Oil Field, Offshore, Water System, Natural GasThread TypesCustomized Size
Define the dimensions and governing specification for this carbon-steel seamless SCH40 equal-tee enquiry. The title references JIS B2220, a unit-free 6 and 180mm without naming the measured feature. Confirm their intended meanings before treating them as an accepted pipe size or component drawing.
Map each title dimension to the supplied branch fitting
Record actual run and branch end diameters, branch angle, center-to-end distances, overall height/length, wall/end thickness, preparation and tolerances. Identify what the 6 and 180mm references describe, including nominal versus measured conventions and the Metric table entry.
The actual type option says Reducer while the title says Equal Tee. Photographic proportions cannot resolve the supplied configuration. Obtain written identity and drawing confirmation. Two recorded material choices use Carbon Steel or a234wpb with one 1/2-to-110-inch label; confirm individual availability instead of assuming continuous supply.
Confirm the document allocation and SCH40 wall basis
Establish how the JIS B2220 reference applies to the requested component and specify complete governing documents, parts and editions. Agree the SCH40 dimensional basis and actual wall values. Resolve Equal, Hexagon and customized hole, feature and thread entries through relevant drawing definitions.
Specify full material designation, grade, condition and traceability. Obtain records supporting the intended seamless body and manufacturing route. Interpret FORGED technique separately from Welding installation attachment. Generic material choices and dark reference images do not certify production, standard conformity or protective surface performance.
Accept the joint against actual operating conditions
Define Plain supplied condition and inspection. High Pressure is nonnumeric; Carbon Steel under Pipe Class is material wording. Supply medium, pressure, temperature, cycling, loads and connected joint requirements. Listed industrial applications need relevant acceptance. Agree material/manufacturing/dimensional and joint inspection, installation, marking/traceability, confirmed supply sizes, OEM deliverables and stated one-year warranty terms.
Informations techniques pour chaque demande produit
Préparez le besoin avant la confirmation finale du produit.
La page produit est un point de départ. Plans, échantillons, interfaces, matières, quantités et réception sont examinés avant confirmation du stock ou de la fabrication.
Discutez de ce produit dans le contexte de votre projet.
Partagez plan, échantillon, référence, quantité et application. Les points inconnus peuvent rester ouverts.
