ASME A105 Forged Ball Valve Enquiry for Oil & Gas
Pour l’approvisionnement industriel
Préparez une RFQ plus claire
Indiquez les éléments ci-dessous afin que RELIA comprenne la pièce et discute avec vous de la prochaine étape.
- Plan, échantillon ou norme de référence
- Nuance du matériau et procédé préféré
- Dimensions, tolérances et finition de surface
- Application, quantité cible et destination
Délais de production, emballage et conditions d’expédition sont confirmés pour chaque projet après accord sur les spécifications et conditions commerciales.
-
applicationGeneralBall MaterialCarbon Steel
-
Connection TypeflangemediaBASE
-
Port Size1/4in - 4instructureControl
-
model numberball valveConnection Size1/4in - 4in
-
customized supportOEM, odmFlow Rate0-100L/min
-
For Maximum Pipe Size4in(10.16cm)Operating Pressure900 psi(62.05bar)
-
Operating Temp. Range0~150 Celsiuspowermanual
-
Sealing MaterialPTFEtemperature of mediaMedium Temperature
-
warranty1 year
An A105 forged ball-valve enquiry for oil or gas service needs a selected mechanism, a precise nominal size and a defined operating rating. Identify the governing project requirements before choosing a valve configuration. A broad size description or a pressure value alone does not establish which assembly meets the pipeline specification. The enquiry should bring those details together for one documented model.
Resolve Nominal Size and Valve Mechanism
Request a section drawing that establishes the operating mechanism of the proposed valve. State the required nominal size and obtain the corresponding port, flange and face-to-face dimensions. Compare those dimensions with the actual mating pipeline drawing. For a large-size requirement, confirm the exact size and model combination rather than assuming that a general range describes every selectable option.
Specify A105 Construction and the ASME Requirement
Identify the exact body material requirement and obtain the associated material documentation. If forged construction is required, have the manufacturing process documented separately. Keep body and ball material specifications distinct. State the applicable ASME standard and edition, the relevant pressure designation and the temperature conditions used for selection. A standard family name needs that specific scope before the proposed assembly can be assessed against it.
Qualify the Actual Oil or Gas Duty
Name the process medium and describe its operating pressure and service temperatures. Include any composition details needed to evaluate seat and seal compatibility. Request the pressure-temperature evidence and sealing specification for the same model shown on the drawings. Complete the enquiry with the selected nominal size, body grade, construction process, standard scope and operating records. Review the full set together so that an isolated table value or photograph marking is not used as the basis for an application decision.
Informations techniques pour chaque demande produit
Préparez le besoin avant la confirmation finale du produit.
La page produit est un point de départ. Plans, échantillons, interfaces, matières, quantités et réception sont examinés avant confirmation du stock ou de la fabrication.
Discutez de ce produit dans le contexte de votre projet.
Partagez plan, échantillon, référence, quantité et application. Les points inconnus peuvent rester ouverts.
