ASME B16.5 A105 Carbon Steel RF Class 300 WN Flange Enquiry
Pour l’approvisionnement industriel
Préparez une RFQ plus claire
Indiquez les éléments ci-dessous afin que RELIA comprenne la pièce et discute avec vous de la prochaine étape.
- Plan, échantillon ou norme de référence
- Nuance du matériau et procédé préféré
- Dimensions, tolérances et finition de surface
- Application, quantité cible et destination
Délais de production, emballage et conditions d’expédition sont confirmés pour chaque projet après accord sur les spécifications et conditions commerciales.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model numberflange 4103TechnicForged
-
ConnectivityWeldingshapeEqual
-
head codeHexagonOverall Length4 in
-
Height6Surface TreatmentPainting
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.25 inPipe FeaturesFlexible, Corrosion-resistant, Chemical Resistant
-
Pipe ClassNot RatedApplicationpetrochemical industry, Shipbuilding, Construction Engineering, Power Industry
-
Thread TypesNPT
This ASME B16.5 flange enquiry combines an A105 carbon steel requirement with RF, class 300 and weld-neck conditions to be confirmed for the selected part. Define the neck-to-pipe connection and the bolted face together. Both interfaces need a drawing that corresponds to the same material, size and pressure designation.
Start with the weld-neck pipe interface
Provide the adjoining pipe's nominal designation, outside diameter and wall thickness. Request the flange neck geometry, bore and pipe-end preparation needed by the joining procedure. Confirm the actual weld-neck form rather than relying on a general flange image. An open or threaded bore in a photograph does not establish the neck dimensions and end preparation of the component being considered.
Complete the RF bolted-joint specification
State the required ASME B16.5 edition and class 300 designation. Obtain the raised-face dimensions, flange thickness, outside diameter and complete bolt pattern for the chosen size. Compare the flange face with the mating flange and the intended gasket and fasteners. Keep the neck and facing dimensions on one selected-part drawing so that pipe attachment and bolted compatibility can be evaluated without mixing configurations.
Confirm A105 and the class operating scope
Request material confirmation for the intended A105 Carbon Steel flange and define the required construction. A Stainless Steel choice needs a separate grade specification. Include the medium, design pressure and temperature when asking for the selected configuration's pressure-temperature documentation. The title's class designation alone does not establish service suitability. Before accepting the flange, verify that the neck drawing, RF joint, material records and rating scope all refer to the same proposed component and meet the project requirements.
Informations techniques pour chaque demande produit
Préparez le besoin avant la confirmation finale du produit.
La page produit est un point de départ. Plans, échantillons, interfaces, matières, quantités et réception sont examinés avant confirmation du stock ou de la fabrication.
Discutez de ce produit dans le contexte de votre projet.
Partagez plan, échantillon, référence, quantité et application. Les points inconnus peuvent rester ouverts.
