A105 Class 150 Threaded Flange for Equipment
Pour l’approvisionnement industriel
Préparez une RFQ plus claire
Indiquez les éléments ci-dessous afin que RELIA comprenne la pièce et discute avec vous de la prochaine étape.
- Plan, échantillon ou norme de référence
- Nuance du matériau et procédé préféré
- Dimensions, tolérances et finition de surface
- Application, quantité cible et destination
Délais de production, emballage et conditions d’expédition sont confirmés pour chaque projet après accord sur les spécifications et conditions commerciales.
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This industrial equipment listing presents a threaded steel flange with A105 and Class 150 title references. It also names ANSI and JIS and mentions a material certificate. Confirm the actual material, selected standard and thread specification before matching the flange to a pipe or equipment connection.
Define the thread and mating flange dimensions
Specify the required thread standard, form, size, pitch or taper and inspection requirements as applicable. The listing does not identify a particular thread system. Obtain the actual drawing rather than assuming a commonly used pipe thread or a universal engagement and sealing method.
Confirm nominal size, facing, thickness, bore and the bolt circle, hole count and diameter. The table lists four half-inch holes, which should be verified for the selected design. The shared 1/2–120 inch range does not establish every threaded flange configuration or material combination as available.
Review Class 150 and the material certificate
Identify the numbered ANSI or JIS specification and applicable edition. Those references do not define one interchangeable drilling, facing or class arrangement. Class 150 is not a 150 psi pressure limit; confirm the actual pressure-temperature requirements for the selected material and joint.
Request the certificate supporting the A105 designation, with grade, condition, traceability and required inspection records. Material Certificate wording in the title does not provide an actual document for review. The generic Carbon Steel threaded option is present, but other material and type choices require their own assessment.
Agree equipment service and purchase acceptance
Describe the fluid, contaminants, temperature, pressure, cycles and loads relevant to the threaded connection. Review the joint requirements and selected flange against the equipment specification. Clarify the finish beyond Polished, then confirm thread and dimensional inspections, marking, preservation, quantity and delivery timing with the actual material package.
Informations techniques pour chaque demande produit
Préparez le besoin avant la confirmation finale du produit.
La page produit est un point de départ. Plans, échantillons, interfaces, matières, quantités et réception sont examinés avant confirmation du stock ou de la fabrication.
Discutez de ce produit dans le contexte de votre projet.
Partagez plan, échantillon, référence, quantité et application. Les points inconnus peuvent rester ouverts.
