ASME B16.9 A234 WPB Eccentric Pipe Reducer Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model numberreducer 3697TechnicForged
-
ConnectivityFemaleshapeEqual
-
head codeHexagonOverall Length4 in
-
Height2Surface TreatmentSmooth
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.25 inPipe FeaturesFlexible, Corrosion-resistant, Chemical Resistant
-
Pipe ClassNot RatedApplicationAgricultural Irrigation, Automotive Repair, Heating Systems
-
Thread TypesNPT
This pipe reducer page supports an eccentric configuration enquiry with ASME B16.9 and A234 WPB requirements. Define the required offset and installation orientation before selecting the fitting. The appropriate reducer depends on the relationship between both pipe centerlines, the actual end dimensions and the material and connection specification.
Show the eccentric offset on the installation drawing
Identify the large and small pipe centerlines and show the required offset orientation in the layout. Provide the reducer length and any dimensional limits imposed by nearby pipework or equipment. A photograph of a reducer cannot establish that it has the required eccentric geometry. Use a configuration-specific drawing to confirm the actual offset rather than selecting a subtype from appearance alone.
Describe the large and small connections separately
Give the nominal size, actual outside diameter and wall thickness at each end. Identify the connection form and any required weld preparation, including the mating pipe walls. Clarify what the selected size option represents and how it relates to the full two-end dimensional pair. These details need to match the intended transition and orientation on the installation drawing.
State the material and standard requirements precisely
Provide the applicable ASME B16.9 edition and the exact A234 WPB requirement for a Carbon Steel configuration. A Stainless Steel choice requires its own grade and material specification. Request construction and dimensional confirmation for the same reducer whose offset is being reviewed. Include the service medium, design pressure and temperature when assessing suitability. Generic shape, flexibility or resistance labels do not establish service qualification. Final selection should follow review of the offset drawing, both end details and selected-part material and pressure-temperature evidence.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
