Stainless Steel Pipe for Industrial Structures
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
InvoicingBy Actual WeightOiled or Non-oiledNon-oiled
-
Section ShapeRoundSurface TreatmentCold Rolled
-
Tolerance±1%Alloy Or NotNon-Alloy
-
ApplicationFluid Pipe, Drill Pipe, Hydraulic Pipe, Gas Pipe, Oil PipeCertificateAPI , ISO 9001
-
Delivery Time8 ~ 14 daysGradestainless steel
-
Outer Diameter219 - 1066 mmSpecial PipeAPI Pipe, Other, EMT Pipe, Thick Wall Pipe
-
StandardASTMTechniqueERW
This stainless steel pipe enquiry is presented for industrial structures and prefab houses, with an A312 reference in the title. Seamless wording conflicts with the ERW table entry. Confirm the actual manufacturing route, grade and project requirements before selecting the pipe for a structural member.
Establish the stainless grade and production route
The title and grade field identify stainless steel, while the table also says Non-Alloy. Ask the supplier to clarify that classification using actual chemistry, grade and material condition records. No specific stainless grade should be inferred from the broad family description.
Resolve seamless versus ERW through the selected production and inspection documents. Obtain the applicable A312 edition, supplied-item scope, material properties, heat-treatment information where required and traceability. The title alone does not establish conformity or justify silently changing the table route.
Define the structural member and dimensional requirements
Identify the proposed member, spans, supports and connections within the industrial structure or prefab building. Provide wind and other relevant loads, environmental exposure and governing design requirements. A pipe standard reference does not independently establish structural load capacity or approval for the completed building.
Choose the exact outside diameter, wall and length from the listed 219–1066 mm diameter, 6–20 mm thickness and 6 m or 12 m length options. Agree the ±1% tolerance basis, straightness, ovality and end details. Confirm actual availability instead of treating the broad ranges as every possible combination.
Agree surface condition and purchase acceptance
Cold-rolled processing does not specify polishing, passivation or a protective coating. Define the surface and non-oiled preservation requirements for the intended environment. The fluid, drilling and EMT labels need separate role-specific review. Obtain actual certificate scope and agree inspections, project acceptance, actual-weight invoicing and confirmation of the 8–14-day delivery wording.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
