ASME B16.9 SCH 80 Butt-Weld Carbon Steel Pipe End Cap Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
TechnicOtherConnectivityWelding
-
shapeRoundhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class150
This ASME B16.9 SCH 80 carbon-steel butt-weld end-cap enquiry needs a size-specific drawing and material package. Confirm the actual connected pipe before selecting the closure. Schedule naming does not independently establish a universal wall thickness or accepted numerical operating capability.
Define the pipe size before the wall requirement
Two actual Cap/Carbon Steel choices carry 10 mm and 12 mm labels. Clarify their nominal or measured roles and the corresponding pipe dimensions. Request specified wall/end thickness, tolerances and acceptance records for the chosen size rather than deriving one thickness from SCH 80 wording alone.
Identify the governing B16.9 document and edition. Specify material designation, grade, condition and traceable inspection evidence. The Carbon Steel label is a material family; it does not establish an exact grade or prove component conformity.
Verify the delivered cap against the end drawing
The inspected views show dark cup/domed caps and differing reference markings. A photographed schedule or grade is not delivery certification. Confirm body profile, depth, outside/inside end dimensions, wall/end thickness, roundness and tolerances on the approved drawing.
Resolve Round/Hexagon wording through actual geometry. The separate 0.25-inch mounting-hole entry cannot define bore or prove a closure opening; specify any permitted opening explicitly. Agree butt-weld preparation and joint inspection against connected pipe material, dimensions and wall. Welding describes attachment without establishing the manufacturing route.
Specify production, finish and duty acceptance
Obtain manufacturing and inspection records for the actual process behind Other wording. Define painting preparation, coating system, internal/external coverage and weld-end exclusions. Establish a governing material-temperature basis for Class 150. State medium, pressure, temperature, cycling, loads and closure conditions; agree installation, material/dimensional inspection, traceability, availability and applicable quotation terms.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
