A105 Carbon Steel Welded Equal Tee for Gas and Oil
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPaintingPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This carbon steel welded equal tee listing targets gas and oil transport with GOST and A105 references. The original image supports a tee form, while the selectable type is labeled Reducer. Confirm the selected component, supplied material and drawing before accepting a configuration for the actual transport system.
Identify the GOST and supplied material requirements
Specify the GOST number, edition and fitting or material scope required for the project. An unnumbered standard reference does not establish conformity. Request actual grade, condition, traceability and material inspection documentation; A105 title wording and an a234wpb option do not provide one certified supplied material package.
The legacy brand wording does not establish the current manufacturer or production records for the order. Confirm actual traceability through the supplied documentation. Clarify Welded connection versus component construction and obtain manufacturing evidence supporting the Forged table entry rather than assuming a production route from the title or image.
Approve equal-tee geometry and surface acceptance
Provide run and branch sizes, bore, diameters, wall requirements, center-to-end dimensions and welding end details on the approved drawing. Confirm Equal geometry and the selected option mapping. Agree tolerances and explicit units, since Hexagon, Customized Size and Metric entries do not provide complete measured values.
Specify the Painting treatment, covered surfaces, surface acceptance and inspection criteria for the actual supply. Metallic appearance cannot establish coating chemistry or corrosion performance. Agree handling and preservation requirements with the material, dimensional and end records needed for acceptance of the selected component before installation.
Set gas and oil transport conditions
State the actual medium, composition, contaminants, pressure, temperature, cycles, transients and loads. High Pressure and Other class leave numerical allowable limits unspecified. Evaluate the confirmed material, geometry, joint and surface package against the transport requirements, then agree inspections, documentation, marking, protection and delivery before approving the fitting.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
