Painted Carbon Steel Tee for Pipelines
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPaintingPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This painted carbon steel tee is listed for high-pressure pipelines with ASME B16.9 and hydraulic-bulging references. The original image shows tee forms, but the selectable type reads Reducer. Establish the exact ordered fitting and approved drawing before choosing a configuration from the broad size range.
Review the forming and seamless references
The title uses Forged, Hydraulic Bulging and Seamless to describe the component. Confirm which manufacturing route applies to the actual supply and request the relevant production and inspection records. These words do not by themselves establish how the selected fitting was made or accepted.
Define the applicable ASME B16.9 edition and fitting coverage with the project requirements. Agree the dimensional and manufacturing acceptance for the actual component. A standard reference in the title is a starting point for clarification, rather than evidence that a particular supplied tee meets every requirement.
Approve tee geometry and painted surfaces
Specify run and branch sizes, bore, wall requirements, center-to-end dimensions, welding end preparation and tolerances. Confirm the Equal field using the actual drawing, and resolve the Reducer option mapping. Metric, Hexagon and Customized Size entries do not replace dimensional values or agreed units.
Request the supplied material grade, condition and traceability documentation. Carbon Steel and a234wpb are selectable labels, not material certificates. For Painting, define the paint system, covered surfaces, surface acceptance and inspection criteria, including how the supplied coating is documented and protected during handling.
Establish pipeline operating acceptance
Identify the fluid, composition, contaminants, pressure, temperature, cycles, transients and loads for the installation. High Pressure and Other class provide no numerical allowable envelope. Assess the selected material, geometry and joint under the project requirements, then agree production documentation, dimensional and end checks, coating inspection, marking, preservation and delivery.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
