45 and 90-Degree Steel Pipe Elbow Material Enquiries
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model number2TechnicForged
-
ConnectivityWeldingshapeEqual
-
head codeHexagonOverall Length4 in
-
Height3Surface TreatmentPainting
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.25 inPipe FeaturesFlexible
-
Pipe ClassNot RatedApplicationAgricultural Irrigation, Automotive Repair, Power Industry, Heating Systems, Shipbuilding, Construction Engineering, petrochemical industry
-
Thread TypesNPTSizeCustomized Size
-
Product nameElbow
A pipe route may call for a 45-degree or a 90-degree elbow, but the required turn must be selected explicitly. This product has Stainless Steel, Alloy and Carbon Steel choices; confirm the angle for the intended material and size rather than assuming both turns are supplied for every selection.
Choose one turn angle for the route position
Mark the required elbow angle and centerline radius on the piping layout, with the adjoining pipe directions shown. Include the end positions and any space restrictions around the turn. A reference photograph of a curved fitting does not establish its measured angle or radius. Confirm the requested geometry as one arrangement so the elbow is reviewed for the specific change of direction needed in the route.
Check both elbow ends against their mating pipes
Provide the end sizes, wall thickness and connection specification at each pipe interface. Identify any welding preparation or thread requirement separately and obtain confirmation for the selected configuration. A single size choice cannot define the full end arrangement, and a general equal-end description does not replace actual dimensions. The elbow drawing should link the route angle to both mating connections rather than leaving the end details to assumption.
Request a service rating for the selected elbow
Name the material grade and any construction requirement that applies to the project, with the medium and design pressure and temperature included. An unrated class descriptor supplies no operating limit, so obtain the applicable rating for the proposed material, wall and geometry. Identify the inspection or material documentation needed for that review. The final angle-specific elbow enquiry should bring route, ends and grade together before service suitability is accepted for the part.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
