ASTM A182 304/316L/2205 Stainless Steel RF Plate Flange, DIN PN16 Enquiry
Für industrielle Beschaffung
Eine klare RFQ vorbereiten
Mit den folgenden Angaben kann RELIA das Bauteil verstehen und den nächsten Schritt mit Ihnen besprechen.
- Zeichnung, Muster oder Referenznorm
- Werkstoffgüte und bevorzugtes Verfahren
- Abmessungen, Toleranzen und Oberfläche
- Anwendung, Zielmenge und Bestimmungsort
Fertigungszeit, Verpackung und Versandbedingungen werden nach Abstimmung von Spezifikationen und Handelskonditionen projektbezogen bestätigt.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentSmoothMounting hole diameter0.25 in
-
Pipe Class150SizeCustomized Size
-
Product nameElbow
This customized RF plate flange enquiry carries ASTM A182, stainless steel 304, 316L and 2205, 2 Inch and DIN PN16 wording. Confirm the actual supplied component, selected size and certified material before accepting it for a raised-face joint.
Confirm the requested size and the entire raised face
The fifteen Flange selections combine 10 mm, 12 mm, 14 mm, 50 mm or 30 mm with Stainless Steel, Alloy or Carbon Steel. The 2 Inch title does not identify an equivalent metric selection or guarantee a specific available size.
Request a drawing defining nominal or outside-diameter basis, bore, flange thickness and outside diameter, bolt circle, hole count and diameter, facing dimensions and tolerances. Check the 0.25 in mounting-hole entry against the selected pattern. RF requires accepted raised-face geometry and gasket requirements; Customized Size, Equal and Hexagon wording does not complete that drawing.
Document ASTM material and forged manufacture separately
Select the exact product specification and grade with a traceable material certificate. A requirement for 304, 316L or 2205 needs its own acceptance; those names do not establish interchangeability or additional separate variants. Alloy alone does not specify its composition.
Agree the forged manufacturing route, relevant heat-treatment requirements and inspection records. For welding, specify actual end preparation, bore and pipe-wall matching. Smooth finish does not establish facing roughness or coating chemistry. Dark or red photographs assist form comparison without certifying either grade or surface treatment.
Accept PN16 against the actual mating joint
Identify the applicable numbered DIN standard and edition, dimensional pattern and rating basis. PN16 and class 150 are not automatic equivalents or certified pressure-temperature limits.
Supply medium, temperature, pressure and cycling for assessment with the mating flange, gasket and fasteners. Send accepted identity, exact-size RF drawing, material certificate, manufacturing and joining requirements, facing finish and complete duty with your enquiry.
Technische Angaben für jede Produktanfrage
Anforderung vor der endgültigen Produktbestätigung vorbereiten.
Die Produktseite ist der Ausgangspunkt. Zeichnungen, Muster, Schnittstellen, Werkstoffe, Mengen und Abnahme werden vor Lagerzuordnung oder Sonderfertigung geprüft.
Dieses Produkt im Projektkontext besprechen.
Teilen Sie Zeichnung, Muster, Referenz, Zielmenge und Anwendung mit. Offene Punkte können in der Prüfung bleiben.
