Carbon Steel Pipe Elbow | 45, 90 and 180 Degree Enquiry
Für industrielle Beschaffung
Eine klare RFQ vorbereiten
Mit den folgenden Angaben kann RELIA das Bauteil verstehen und den nächsten Schritt mit Ihnen besprechen.
- Zeichnung, Muster oder Referenznorm
- Werkstoffgüte und bevorzugtes Verfahren
- Abmessungen, Toleranzen und Oberfläche
- Anwendung, Zielmenge und Bestimmungsort
Fertigungszeit, Verpackung und Versandbedingungen werden nach Abstimmung von Spezifikationen und Handelskonditionen projektbezogen bestätigt.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.2 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
A steel pipe elbow enquiry begins with the required direction change and the route available for the pipeline. Select the angle and bend geometry before comparing material or manufacturing requirements. If the project needs a return arrangement, identify exactly how the proposed components form that arrangement so the complete assembly can be reviewed.
Choose the Angle and Identify Every Component
State whether the design requires a 45-, 90- or 180-degree direction change, then request a drawing of the selected proposal. Specify the bend radius and relevant end-to-centre dimensions. For a return requirement, establish whether the proposal consists of one component or joined components; identify every joint and include it in the fabrication review. The presence of several angle terms in an enquiry does not define a model for each angle.
Fit the End Geometry to the Planned Pipe Route
Provide the nominal size, mating outside diameter and wall thickness at both ends. Define weld preparation and compare the proposed geometry with available clearance, pipe alignment and support requirements. Name the exact steel grade and requested manufacturing route. Where seamless construction is required, obtain production documentation for the selected component rather than relying on surface appearance. Any coating or special mounting requirement should also be identified on the drawing and specification.
Review the Duty of the Complete Bend Arrangement
Identify the governing dimensional and pressure-design standards and state the fluid, operating pressure and temperature. Include relevant operating changes and the joint requirements that apply to the assembly. Request material, manufacturing and design records covering the proposed configuration. An isolated class number cannot establish the pressure capability of the fitting or its joints. Complete the enquiry with the angle, radius, component arrangement, end dimensions and qualified service scope so the intended direction change can be assessed as a complete pipeline detail.
Technische Angaben für jede Produktanfrage
Anforderung vor der endgültigen Produktbestätigung vorbereiten.
Die Produktseite ist der Ausgangspunkt. Zeichnungen, Muster, Schnittstellen, Werkstoffe, Mengen und Abnahme werden vor Lagerzuordnung oder Sonderfertigung geprüft.
Dieses Produkt im Projektkontext besprechen.
Teilen Sie Zeichnung, Muster, Referenz, Zielmenge und Anwendung mit. Offene Punkte können in der Prüfung bleiben.
