ASME B16.9 Stainless or Carbon Steel Butt Weld Equal Tee Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.26 in
-
Pipe Class150SizeCustomized Size
-
Product nameElbow
This pipe fitting enquiry requests an ASME B16.9 butt-weld equal tee with stainless, alloy or carbon steel material selections. Establish the actual selected fitting type before approving branch dimensions. The supplied geometry, exact grade and standard acceptance must be documented for the chosen configuration.
Approve a complete three-end drawing
For a tee request, define run and branch nominal sizes, outside diameters, all end walls, centre-to-end dimensions, branch orientation and tolerances. Equal needs accepted same-size run/branch geometry. Elbow choices require a separate bend drawing and cannot be specified by a tee description.
The 10, 12, 14, 50 and 30 mm labels do not define every end. The listed mounting hole of 0.26 in cannot be used as the pipe bore. Customized Size requires approved dimensions and inspection criteria. Dark gallery examples and protective blue covers cannot qualify selected equal bores, grade or coating.
Verify B16.9 scope and the actual material
Confirm the applicable B16.9 edition, selected dimensional scope, inspection records and supplied marking. The reference alone is not certification or a material specification. Request the exact product material specification, selected grade, heat-traceable certificate and matching identification.
Stainless Steel, Alloy and Carbon Steel are distinct choices; no specific stainless or carbon grade is established here. Forged requires actual manufacturing and inspection evidence. Butt-welded supply needs selected preparation, matching pipe walls and joining/inspection acceptance before the assembly can be approved.
Specify coating and assess the joined duty
Painting requires defined surface preparation, coating extent, weld-area treatment and service compatibility. Photographic colour does not establish coating acceptance. A numerical service limit requires a complete rating basis beyond the Pipe Class 150 label. Assess actual material, walls and joined assembly against medium, pressure, temperature and governing design conditions. Send selected fitting type, complete end or bend drawing, exact certificate, B16.9 acceptance scope, weld/coating requirements and full duty with the enquiry.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
