Carbon Steel Welding Pipe Fitting Reducer
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
model numberDN15-1200Technicpushing
-
ConnectivityWeldingshapeReducing
-
head coderoundStandardANSI JIS DIN ASME
-
Wall thicknessSCH 10-160SizeDN 15-1200
-
MaterialCarbon steel
This carbon steel pipe fitting reducer provides a reducing form with a welding connection. When planning a transition between different pipe sizes, use the required dimensions and project drawing to select the reducer configuration. Confirm the large end, small end and wall thickness together before choosing the component for installation.
Choosing the two ends of a welding reducer
A carbon steel reducer must be checked against both adjoining pipes, rather than selected by a single diameter. For an accurate enquiry, specify the large-end and small-end sizes, state the units, and identify whether the dimensions are nominal pipe sizes or measured diameters. Include the required wall thickness and end preparation in the same drawing. These checks help establish which reducing fitting matches the intended pipe transition.
Confirming the reducer geometry and material grade
The carbon steel material family and reducing shape identify this pipe fitting, but a final configuration needs a more detailed specification. Confirm whether your layout requires concentric or eccentric geometry and supply the corresponding dimensional drawing. For the carbon steel welding connection, also identify the required steel grade and the applicable dimensional standard, including its edition where relevant. A general standard family name does not establish compliance with every specification in that family.
Preparing a project enquiry for this carbon steel fitting
Send the reducer drawing with both end dimensions, wall thickness, connection preparation and material requirements. For a welded carbon steel pipe transition, include the operating medium, design pressure and temperature so suitability can be assessed against the required project documentation. A schedule designation alone does not establish the reducer's working pressure. Confirm the requested size combination and supporting technical documents before ordering this carbon steel pipe fitting reducer.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
