Low-Pressure Forged Carbon Steel Eccentric Reducer, DN100–DN150 Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty3 Yearscustomized supportOEM, odm
-
TechnicForgedConnectivityWelding
-
shapeReducinghead codeOther
-
Overall Length1/2"-4"Height1/2"-4"
-
Surface TreatmentPolishedPressureLow Pressure
-
System of MeasurementMetricMounting hole diameter1/2"-4"
-
Pipe FeaturesCorrosion-resistantPipe ClassOther
-
ApplicationOtherThread TypesNPT
This carbon steel eccentric reducer enquiry carries forged, polished, low-pressure and corrosion-resistant wording. Three actual selections are offered: DN150, DN125 and DN100, each with Reducer and Carbon Steel. Define the complete reduction pair and the actual delivered end arrangement before accepting a selected component.
Specify both ends and the eccentric installation position
A single DN selection does not establish the larger and smaller pipe sizes. Give both end diameters, their dimensional basis, wall requirements, overall length, eccentric offset and tolerances. Establish the required installed orientation on the accepted piping drawing rather than assuming it from an example image.
The repeated length, height and mounting-hole range does not provide this complete selected geometry. Two dark reducing-body photographs help illustrate the family but do not certify actual DN pairs, grade, manufacturing route or pressure capability. Request the selected dimensional drawing with matching identification.
Accept the delivered joining and surface requirements
Obtain an explicit connection definition for each end. Welding requires accepted preparation, matching pipe-wall dimensions and joining inspection. Any threaded supply needs exact thread form, size, gender, gauging, engagement and sealing acceptance. A general connection label cannot establish the full selected two-end arrangement.
Request the exact carbon steel product specification, grade, heat-traceable certificate and actual manufacturing records for forged supply. Polished establishes no measured roughness or coating composition. Specify surface acceptance and the protection required for the actual medium and environment; corrosion-resistant wording is not a universal compatibility guarantee.
Complete the reducer duty and enquiry documents
Low Pressure and Other class wording give no certified working limit or pressure-temperature curve. Assess actual medium composition, temperature, pressure cycles and the complete installed joint under the project governing basis. Send the chosen DN option with both end sizes, eccentric orientation, accepted end drawing, grade certificate, route and finish requirements, duty and inspection criteria.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
