2" RF B16.5 Class 150 A105 Socket-Weld Carbon Steel Flange, Forged CNC Machined
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
Surface TreatmentCNC MachinedApplicationConstruction
-
Bolt Hole Diameter1/2"~24"Bolt Hole Quantity6
A 2-inch RF B16.5 Class 150 A105 socket-weld carbon steel flange is the requested configuration for this construction enquiry. Confirm those particulars on the accepted delivery drawing before treating the forged, CNC-machined naming as an approved component specification.
Confirm the requested size and raised face
The actual size selection is a 1/2"~24" range rather than a discrete 2-inch choice. RF and Class 150 are title references, so obtain the selected facing and class explicitly. Agree the applicable B16.5 edition and type/size/class scope alongside the exact nominal size.
Carbon Steel and Stainless Steel each have Blind, Weld Neck, Slip On, Socket Weld, Lap Joint and Threaded Flange choices. Select one supplied type/material combination. For socket weld, require the accepted socket and bore dimensions with mating-pipe and installation requirements; another listed type cannot establish the same end arrangement.
Accept material and drilling evidence
A105 identifies the named carbon-material basis without certifying the stainless alternative. Obtain the accepted specification, grade, product form, condition and traceable inspection records, with evidence supporting the actual forging and machining route.
Verify outside diameter, thickness, raised-face dimensions/finish, bolt circle, hole count, hole diameters and tolerances. The six-hole table entry and broad bolt-hole diameter range cannot certify this requested drawing. The viewed open-bore flanges and dark-finished pair cannot establish delivered size, socket detail, A105 material, coating or drilling.
Evaluate the complete Class 150 joint
Construction wording does not supply an operating envelope. Class 150 requires the applicable material-temperature basis rather than one fixed pressure, and surface appearance does not prove finish compliance.
Submit actual medium, pressure, temperature, cycling and mechanical loads. Review compatible gasket, fasteners, mating flange and assembly requirements together with the selected end/drilling drawing and material package before accepting the complete joint.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
