A105 Class 150 Threaded Flange for Equipment
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This industrial equipment listing presents a threaded steel flange with A105 and Class 150 title references. It also names ANSI and JIS and mentions a material certificate. Confirm the actual material, selected standard and thread specification before matching the flange to a pipe or equipment connection.
Define the thread and mating flange dimensions
Specify the required thread standard, form, size, pitch or taper and inspection requirements as applicable. The listing does not identify a particular thread system. Obtain the actual drawing rather than assuming a commonly used pipe thread or a universal engagement and sealing method.
Confirm nominal size, facing, thickness, bore and the bolt circle, hole count and diameter. The table lists four half-inch holes, which should be verified for the selected design. The shared 1/2–120 inch range does not establish every threaded flange configuration or material combination as available.
Review Class 150 and the material certificate
Identify the numbered ANSI or JIS specification and applicable edition. Those references do not define one interchangeable drilling, facing or class arrangement. Class 150 is not a 150 psi pressure limit; confirm the actual pressure-temperature requirements for the selected material and joint.
Request the certificate supporting the A105 designation, with grade, condition, traceability and required inspection records. Material Certificate wording in the title does not provide an actual document for review. The generic Carbon Steel threaded option is present, but other material and type choices require their own assessment.
Agree equipment service and purchase acceptance
Describe the fluid, contaminants, temperature, pressure, cycles and loads relevant to the threaded connection. Review the joint requirements and selected flange against the equipment specification. Clarify the finish beyond Polished, then confirm thread and dimensional inspections, marking, preservation, quantity and delivery timing with the actual material package.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
