304L Weld Neck Flange for Water Treatment
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This water treatment machinery listing describes a stainless steel weld neck flange with 304L and EN 1092-1 Type 11 references. It also uses ANSI Certified wording. Confirm the actual material package, selected drawing and any required certification evidence before accepting those title references for the project.
Match the neck and weld preparation
The Stainless Steel weld neck option is selectable, but the pipe connection still needs a specific drawing. Define nominal size, bore and pipe match, neck geometry and weld preparation, along with facing and thickness. Review the welding and inspection requirements under the machinery or piping specification.
Check the complete drilling pattern against the mating flange. Four half-inch holes are listed in the table and require confirmation for the chosen size. The shared 1/2–120 inch range does not establish one drawing, one standard scope or availability of every material and flange configuration.
Request material and certification evidence
Obtain records supporting grade 304L, with the required condition and traceability. The generic Stainless Steel option does not independently establish that grade. Clarify the applicable edition, dimensions and pressure designation associated with the EN 1092-1 Type 11 reference for the actual component.
ANSI Certified wording does not provide a certificate, issuer or covered scope. If certification is required, request the actual document and assess it against the purchase requirements. Do not assume dual-standard interchangeability or a pressure rating from the combined title. Agree the finish criteria beyond Polished.
Describe the machinery water service
Provide water chemistry, treatment chemicals, contaminants, temperature, pressure, cycles and relevant equipment loads. Assess the selected material and joint for those conditions without assuming potable-water approval or corrosion immunity. Confirm material, dimensional, weld-preparation and finish inspections, required records, marking, preservation and delivery timing for the chosen weld neck flange.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
