Stainless Steel Pipe Fittings: Socket Coupling, Exhaust Elbow & Reducer Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.26 in
-
Pipe Class150SizeCustomized Size
-
Product nameElbow
This pipe fitting enquiry covers stainless steel, Alloy and carbon steel choices under reducer, elbow and socket-coupling naming. Confirm the actual component construction before selecting it for a pipe transition or exhaust connection.
Identify the delivered component before defining the transition
The fifteen selections combine reducer with 10 mm, 12 mm, 14 mm, 50 mm or 30 mm and one of three material labels. Each metric size is a single label; it does not specify both ends of a reducing fitting.
Request an accepted drawing identifying the component subtype and equal or reducing geometry. For a reducer, include large and small end diameters, diameter basis, wall thicknesses, length, concentricity or offset and tolerances. An elbow or coupling enquiry needs its corresponding geometry. Photographs assist shape comparison without certifying the supplied dimensions or subtype.
Agree welding ends and the exact selected material
Specify whether the required connection uses socket or butt-weld ends, then define mating dimensions, preparation, wall compatibility and inspection acceptance. Hexagon wording does not establish the complete fitting form. Confirm the manufacturing route against the Forged requirement.
Stainless Steel, Alloy and Carbon Steel are material alternatives. Obtain the selected product specification, exact grade and traceable certificate; Alloy alone does not identify its composition. For painting, agree preparation, coating chemistry, thickness and service compatibility where needed.
Assess exhaust conditions and complete-joint acceptance
Exhaust wording does not establish thermal, corrosion or emissions qualification. Provide medium composition, operating temperature, pressure and cycling. Class 150 requires a governing rating basis and material assessment; it is not an independent 150 psi operating limit.
Customized Size and the 0.26 in mounting-hole entry do not complete the pipe ends. Send the accepted subtype drawing, both end dimensions, selected material evidence, welding and coating requirements, actual duty and inspection criteria for a specific fitting enquiry.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
