Carbon Steel Flange for Low-Pressure Water Supply
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This carbon steel flange listing is intended for low-pressure water supply enquiries. Its title references JIS B2220, S10C, ASME and ISO, and describes a Polished plate flange. Confirm the actual construction and material documentation before matching these references to a specific water-system connection.
Identify the intended plate construction
The selectable types cover several flange designs, but do not include a separate Plate Flange choice. Ask for the drawing of the proposed component rather than treating the plate wording as another name for an existing option. Select the actual type and connection details required by the project.
Specify nominal size, facing, thickness, bore and the full drilling pattern. The table states four half-inch bolt holes; verify their applicability against the mating flange. The shared 1/2–120 inch range does not demonstrate a common drilling layout or confirm every material and construction combination as available.
Confirm S10C and the applicable specification
Request actual grade, condition and traceability records supporting the S10C designation. Carbon Steel is the generic selectable material and does not independently verify that more specific reference. Define the intended finish beyond Polished and agree how the relevant surfaces will be inspected.
Confirm the applicable edition and selected requirements of JIS B2220 for the actual component. ASME and ISO wording does not supply additional numbered specifications or establish certification. Agree the required dimensional and connection basis without assuming interchangeability between different standard systems.
Quantify the water supply duty
Low Pressure is a general description rather than a numerical operating limit. Provide water composition, temperature, normal and transient pressure, cycles and joint requirements for review. No potable-water approval is established here. Confirm the material and dimensional inspections, finish acceptance, marking, preservation, quantity and delivery against the actual water-system specification.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
