EN1092-1 Carbon Steel Weld Neck and Slip-On Flange
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model numberflange 4103TechnicForged
-
ConnectivityWeldingshapeEqual
-
head codeHexagonSurface TreatmentSmooth
-
Mounting hole diameter0.2 inPipe Class125
This EN1092-1 carbon steel flange listing includes weld-neck, slip-on and threaded references. Actual options pair five metric size labels with Stainless Steel or Carbon Steel, while the type field remains Flange. Identify one construction and selected material before specifying the component.
Choose the flange form before allocating dimensions
Confirm weld-neck, slip-on or threaded construction with an approved drawing. Specify actual nominal size, bore and mating interface; the 10, 12, 14, 50 and 30 mm labels require clarification rather than automatic conversion. Agree neck or other interface dimensions where relevant to the chosen form.
Review outside diameter, thickness, facing geometry/finish, bolt circle, hole count, hole diameter and tolerances. Allocate the table’s 0.2-inch mounting-hole entry and Hexagon code to the selected drawing instead of treating them as universal drilling or flange shape. Confirm individual configuration availability.
Clarify EN1092-1 coverage and the class system
Agree the governing edition and applicable form/material/size provisions with accepted records. The Pipe Class 125 entry does not identify an allocated class system or approved pressure-temperature limit. Do not convert it into a PN designation or working-pressure value without supporting documentation.
Request the full selected steel grade, condition, traceability, material certificates and manufacturing evidence for forged construction. Define smooth-surface inspection without assuming corrosion approval. For threaded selection, specify the actual thread standard and size; for welding, establish pipe/end compatibility and preparation.
Approve the selected flanged joint
State medium, pressure, temperature, cycling, loads and material/sealing compatibility. Obtain complete joint acceptance including mating flange, gasket, bolting, alignment and installation inspection. Agree marking, dimensional/class/manufacturing records, included parts and quotation scope for the actual selected form and size.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
