ASTM A234 WPB 22.5-Degree SCH 40 LR Carbon Steel Elbow, NPT Thread Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty3 Yearscustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeBendhead codeHexagon
-
Overall Length1/2" - 12"Height1/2" - 12"
-
Surface TreatmentsmoothPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter1/2" - 12"
-
Pipe Featurescorrosion resistantPipe ClassNot Rated
-
ApplicationConstruction EngineeringThread TypesNPT
The ASTM A234 WPB 22.5-degree SCH 40 LR carbon steel elbow enquiry starts with the intended change in pipe direction. Establish the selected angle, radius and wall drawing before deciding whether the supplied connection matches the construction joint.
Match the requested direction change
The actual variant is Elbow with Carbon Steel and a 1/2" - 12" range. Select the exact nominal size and required angle explicitly. The range is not an inventory of discrete sizes, and LR or SCH 40 naming does not provide measured dimensions for each selection.
Request centerline radius, center-to-end dimensions, end outside diameters, bores, wall thickness and tolerances. Repeated overall length, height and mounting-hole ranges cannot describe the complete bend. Confirm the selected drawing against both mating pipes and the available routing space.
Resolve the delivered connection before fit-up
NPT Thread naming requires actual thread acceptance evidence. Obtain the supplied-end drawing and agree the joining method, including thread details or welding preparation as applicable. Generic Hexagon wording does not establish a finished end profile.
The two viewed references show curved fittings with plain or beveled ends, without readable thread certification. Their apparent bend angles cannot certify the named 22.5-degree selection. Use the accepted delivery drawing and inspection results to establish angle, schedule and connection.
Accept the material and construction duty
For the carbon option and A234 WPB wording, agree the applicable specification, grade, product form and delivery condition, supported by traceable material records. Forged naming needs evidence of actual manufacture. Smooth or corrosion-resistant descriptions do not define coating chemistry or suitability for every medium.
Low Pressure and Not Rated do not specify numerical operating limits. State the medium composition, pressure and temperature range, cycling, flow and external loads. Complete acceptance requires selected bend and end dimensions, material/manufacturing documentation, inspection criteria and the operating basis for the assembled pipe joint.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
