ASME B16.9 Carbon Steel 45° Short-Radius Butt-Weld Elbow
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM
-
model numberelbow 2069TechnicCasting
-
ConnectivityMale/FemaleshapeEqual/Reducing
-
head codeHexagon/RoundSurface TreatmentPainting
-
Mounting hole diameter0.17 inPipe Class150
This pipe elbow enquiry brings together a 45-degree direction change, a short-radius requirement and carbon-steel butt-weld construction under ASME B16.9. Use those requirements to identify one offered model and its supporting drawing. The size and material options need to be linked to that model before the curved product photographs can be used as a useful visual reference.
Check the direction change against the layout
Provide the required angle and centreline radius, together with end-to-centre dimensions and available pipe-routing space. Confirm whether the chosen elbow has equal or reducing ends. Show both outside diameters, nominal sizes and wall thickness on the drawing, and explain the dimensional basis of the millimetre-labelled option. Appearance alone cannot establish the specified angle, radius or reduction. Review access for the actual joint preparation and subsequent inspection as part of the layout check.
Define material and weld-end alignment
Select the carbon-steel alternative and state its exact grade and material specification. Stainless-steel options require their own grade identification rather than inheriting the title's material requirement. Match the bevel, land and end wall to the mating pipe and agree root alignment and inspection requirements. The Male/Female field does not define the butt-weld interface. Ask for selected-item production and inspection records before accepting the generic Casting label as the manufacturing route.
Link acceptance to the operating conditions
Specify the B16.9 edition and dimensional tolerances to be checked, then identify the evidence required for acceptance. Give the fluid, design pressure and temperature, corrosion conditions and joining requirements for engineering review of the complete connection. Class 150 is an isolated source field and does not establish a pressure-temperature limit for the elbow. Painting, head-code and mounting-hole labels also do not demonstrate protective finish performance or measured bend geometry. The final enquiry should connect one dimensional drawing with the exact grade, weld details and traceable acceptance records.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
