304 Swaged Nipple | B16.11 / MSS SP-95 Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM
-
model numbernipple 3697TechnicCasting
-
ConnectivityFemale/MaleshapeReducing
-
head codeRoundSurface TreatmentPainting
-
Mounting hole diameter0.26 inPipe Class150
This swaged-nipple enquiry focuses on a 304 stainless-steel transition fitting with B16.11 and MSS SP-95 references. Identify one offered model before assigning the title's manufacturing and pressure labels to it. The tapered photographs support the fitting family, while the end sizes, alignment, grade and allowable duty require a selected drawing and traceable acceptance records.
Define the complete two-end transition
State the larger and smaller nominal pipe sizes independently. Request outside diameters, bore, wall thickness at each end, overall length and transition dimensions on one drawing. Explain the dimensional basis of the millimetre option and specify the required concentric or eccentric alignment rather than estimating it from an image. Identify the actual thread, socket or weld connection through its own dimensions and governing end specification; Female/Male alone does not establish the interface.
Confirm 304 and the accepted production route
Select the stainless-steel alternative and state the exact material specification for the 304 requirement, supported by records linked to the offered nipple. Carbon-steel options need a separately agreed grade. Resolve the Forged and Casting labels with production and inspection documentation before accepting a manufacturing route. Ask the supplier to explain how the B16.11 and MSS SP-95 references apply to this construction and agree the applicable editions and acceptance criteria.
Qualify the connection for actual duty
The title and table carry different pressure-class labels, so request the selected class and its documented pressure-temperature basis instead of treating general high-pressure wording as a service limit. Provide the fluid, operating pressure and temperature, corrosion conditions and joining requirements for assessment of the complete transition connection. Painting and mounting-hole labels do not qualify finish performance or measured geometry. An actionable enquiry links one end-pair and transition drawing to the exact grade, resolved production route and agreed standard and duty records.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
