RF WN Flange Enquiry | B16.5 or EN1092-1, F304 or A105 Requirements
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model numberflange 4103TechnicForged
-
ConnectivityWeldingshapeEqual
-
head codeHexagonSurface TreatmentSmooth
-
Mounting hole diameter0.25 inPipe Class1000
-
ApplicationAgricultural Irrigation, Automotive Repair, Heating Systems
This RF weld-neck flange enquiry brings together dimensional standard, material and pressure-designation requirements that must be selected for one configuration. Identify whether the project calls for ASME B16.5 or EN1092-1, then define the applicable material and joint geometry. The enquiry should establish a clear specification without assuming that different standard systems describe an interchangeable flange.
Choose the standard and its pressure designation
State the required dimensional standard and edition on the project drawing. Define the pressure designation within that standard and confirm PN16 only where it applies to the selected configuration. Request the corresponding facing, flange thickness and bolt-pattern dimensions. A designation from another system should not be treated as an equivalent operating rating without the applicable documentation and a complete mating-interface check.
Separate the F304 and A105 material requirements
Identify the A182 F304 requirement for the intended Stainless Steel configuration or the A105 requirement for the Carbon Steel configuration. Request material confirmation for that same flange and the required construction. These are separate material specifications, not a combined grade. General flange images may illustrate several forms and cannot establish the material or exact weld-neck construction of the selected component.
Match the neck and raised-face joint
Obtain a drawing showing the neck geometry, bore, pipe-end preparation, RF facing and complete bolted interface. Compare the neck end with the adjoining pipe and the flange face with the mating flange, gasket and fasteners. Include the medium, pressure and temperature when requesting the selected configuration's qualification records. Before acceptance, confirm that the standard, pressure designation, grade and drawing all describe the same flange. This keeps pipe attachment and joint compatibility tied to the actual material and operating scope.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
