SCH40 180° Carbon Steel Butt-Weld Elbow Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
A SCH40 carbon-steel butt-weld elbow for a requested 180-degree return needs a defined layout before selection. The title establishes the enquiry direction, while the size and material choices require a drawing that identifies the actual fitting. Curved fittings in the photographs do not establish the same return angle or dimensions for every option.
Set the return spacing and installation envelope
Show the required centreline radius, distance between the two end centres, overall height and clearances on the selected drawing. Check these dimensions against the adjoining parallel pipe runs and reserve access for welding and inspection. Confirm equal-end nominal size, outside diameter, actual wall and weld preparation at both ends. Explain what each millimetre label measures. The Hexagon and mounting-hole fields cannot replace a measured elbow layout.
Link SCH40 to a defined size and material
SCH40 must correspond to the chosen nominal size and actual wall record; it does not identify a fixed thickness across the listed sizes. Select carbon steel for the title requirement and request the exact material specification and grade. Stainless Steel and Alloy alternatives need their own material assignments. Agree applicable material and dimensional standards and editions, since the source supplies no standard number. Obtain traceable production and inspection evidence before accepting Forged as the actual manufacturing route.
Define coating and welded-return acceptance
Specify surface preparation, coating coverage and required weld-end condition rather than relying on Painting alone. Provide fluid, pressure, temperature, corrosion conditions and mating-pipe specifications for assessment of the complete joint. Pipe Class 1000 alone does not establish allowable duty. All Size and Customized Size do not prove arbitrary size capability, stock or availability. Base acceptance on the selected return drawing, size-linked wall, material records and agreed joining and inspection requirements.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
