Welded Elbow for Building Water Supply
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty3 Yearscustomized supportOEM, ODM, obm, odm
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall Length4 inHeight10cm
-
Surface TreatmentPolishingPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter0.2 in
-
Pipe FeaturesNo additional FeaturesPipe Class1000
-
ApplicationBuilding Water Supply And DrainageThread TypesNPT OR BSPT
This ST HDPE large-diameter welded elbow enquiry concerns building-water supply and drainage connections. Agree the actual supplied material and fitting configuration before ordering against the product name. The purchase specification should identify each component, both pipe ends and the operating conditions.
Define the water-supply connection
The actual size label is 10 mm, so state whether it represents a nominal size, outside diameter, bore or another measurement. Large-diameter wording does not select a dimension. The 4 in overall length, 10cm height and 0.2-inch mounting-hole entries describe other dimensions rather than replacement pipe-end sizes.
Provide a drawing with the required angle, centerline radius, center-to-end dimensions, inlet and outlet geometry, bore, wall and tolerances. Specify the joining arrangement and any welding preparation or NPT/BSPT feature by the relevant component and end. Do not infer the delivered size or angle from a reference photograph.
Document material and production requirements
Stainless Steel and Carbon Steel choices are alternatives and need the selected specification, grade, product condition and inspection traceability. Where an HDPE component is requested, identify its accepted material designation and any separate connecting parts. Title naming alone cannot certify the assembly's composition.
Match forged and welded wording to the accepted material and applicable production or attachment step. Request the relevant manufacturing and inspection evidence. Agree the polished finish without treating appearance as proof of corrosion resistance or water-service approval. Use ST as an enquiry reference and confirm provenance when manufacturer identity matters.
Set numerical acceptance for the project
Provide the actual medium, pressure, temperature, cycling and imposed loads. Class 1000 naming requires its governing standard and material-temperature basis; low-pressure wording gives no numerical limit. Agree installation and inspection requirements, requested OEM, ODM or OBM scope, and the stated three-year warranty terms with the quotation.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
