Steel Equal Tee | A234, DN300 and SCH80 Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
An equal tee enquiry should identify the required branch connection and relate it to both run ends. For a project specifying DN300 and SCH80, establish the selected fitting drawing before evaluating material or manufacturing claims. The drawing and supporting records need to describe one configuration that can be compared with the intended pipeline.
Confirm the DN300 and Equal-Branch Requirement
State the nominal sizes at both run ends and the branch, then provide the corresponding mating pipe outside diameters. Ask for the dimensions that establish the required equal-branch relationship and the wall requirement at each connection. A single millimetre label does not identify this three-port configuration. Confirm the nominal-size convention and the mapping of the requested DN300 fitting to the selected model before accepting the dimensional proposal.
Name the Exact Material and Production Requirements
If the project specifies A234, identify the required grade and applicable edition explicitly. Request traceable material records for the quoted tee instead of treating the specification number as a complete grade designation. Give the wall-schedule convention and obtain the actual thicknesses for the chosen size and material. Where seamless construction is required, obtain manufacturing evidence linked to the selected item. Define weld-end preparation, dimensional requirements and any surface treatment independently.
Assess the Tee as Part of the Welded Assembly
Provide the fluid, operating pressure and temperature, together with joint and fabrication requirements. Identify the governing fitting and pressure-design standards and request documentation supporting the selected tee's scope. An isolated class number or visible product marking does not establish the qualified duty of the complete assembly. Finalize the enquiry with the three-port drawing, size and wall mapping, exact grade, manufacturing records and documented operating limits for review against the pipeline design.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
