DN1600 SS304 Class 150 Flange | ASME B16.47 Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentSmoothMounting hole diameter0.26 in
-
Pipe Class150SizeCustomized Size
-
Product nameElbow
This stainless-steel flange enquiry carries DN1600, SS304 and Class 150 requirements with an ASME B16.47 reference. The Flange options and open-bore ring photograph establish the family. Selection starts by confirming the actual nominal size and construction, so the proposed dimensional standard and material records describe the same flange.
Resolve nominal size and the proposed flange construction
Ask how the millimetre option labels relate to the requested DN1600 and obtain the selected bore and nominal-size mapping. Confirm what SO means for the offered model and whether its size and construction are covered by the proposed B16.47 edition. Identify the applicable dimensional series or agreed engineered basis and acceptance records. The two photographed rings cannot establish measured size, slip-on construction or standard conformity. Customized Size does not prove arbitrary capability or availability.
Match the complete drilling and gasket-contact geometry
Record bore, flange outside diameter, thickness, bolt-circle diameter, hole count and diameter, face form and required surface finish on the drawing. The isolated mounting-hole field and Smooth label do not define a full drilling pattern or gasket-contact finish. Match both mating flanges, gasket and bolting before agreeing installation clearance and assembly procedure. Define the required welded attachment to the pipe and its inspection requirements for the selected construction.
Verify SS304 records and the actual joint duty
Select Stainless Steel for the SS304 requirement and obtain the exact material specification, grade and traceable records. Carbon Steel and Alloy alternatives need separate assignments. Verify Forged through production and inspection evidence rather than surface appearance. Class 150 is a class requirement and does not alone state allowable pressure at the intended temperature. Supply fluid, pressure, temperature and corrosion conditions for assessment of the complete flange, gasket and bolting assembly. Acceptance should connect the resolved drawing to material and manufacturing evidence.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
