Carbon Steel SCH40 Seamless Tee
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPlainPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesCustomized SizePipe ClassCarbon Steel
-
ApplicationShipbuilding, Oil Field, Offshore, Water System, Natural GasThread TypesCustomized Size
Define the dimensions and governing specification for this carbon-steel seamless SCH40 equal-tee enquiry. The title references JIS B2220, a unit-free 6 and 180mm without naming the measured feature. Confirm their intended meanings before treating them as an accepted pipe size or component drawing.
Map each title dimension to the supplied branch fitting
Record actual run and branch end diameters, branch angle, center-to-end distances, overall height/length, wall/end thickness, preparation and tolerances. Identify what the 6 and 180mm references describe, including nominal versus measured conventions and the Metric table entry.
The actual type option says Reducer while the title says Equal Tee. Photographic proportions cannot resolve the supplied configuration. Obtain written identity and drawing confirmation. Two recorded material choices use Carbon Steel or a234wpb with one 1/2-to-110-inch label; confirm individual availability instead of assuming continuous supply.
Confirm the document allocation and SCH40 wall basis
Establish how the JIS B2220 reference applies to the requested component and specify complete governing documents, parts and editions. Agree the SCH40 dimensional basis and actual wall values. Resolve Equal, Hexagon and customized hole, feature and thread entries through relevant drawing definitions.
Specify full material designation, grade, condition and traceability. Obtain records supporting the intended seamless body and manufacturing route. Interpret FORGED technique separately from Welding installation attachment. Generic material choices and dark reference images do not certify production, standard conformity or protective surface performance.
Accept the joint against actual operating conditions
Define Plain supplied condition and inspection. High Pressure is nonnumeric; Carbon Steel under Pipe Class is material wording. Supply medium, pressure, temperature, cycling, loads and connected joint requirements. Listed industrial applications need relevant acceptance. Agree material/manufacturing/dimensional and joint inspection, installation, marking/traceability, confirmed supply sizes, OEM deliverables and stated one-year warranty terms.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
