ASTM A234 WPB Carbon Steel 90° LR Elbow
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty3 Yearscustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeBendhead codeHexagon
-
Overall Length1/2" - 12"Height1/2" - 12"
-
Surface TreatmentsmoothPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter1/2" - 12"
-
Pipe Featurescorrosion resistantPipe ClassNot Rated
-
ApplicationConstruction EngineeringThread TypesNPT
This ASTM A234 WPB carbon steel elbow listing describes a90-degree long-radius component for construction piping. The actual catalogue choice is Carbon Steel/Elbow with a half-inch-to12-inch range. Establish the individual size and approved drawing before specifying the component for a project.
Resolve the end connection before installation
The table records Welding connectivity and an NPT thread entry. Those fields do not establish one accepted end design. Request a drawing identifying the actual connection, end preparation and mating pipe interface; do not assume both arrangements are supplied on the same elbow.
Likewise, the Hexagon head code needs clarification against the selected component. Confirm90-degree angle, long-radius geometry, center-to-end dimensions, bore, outside diameter, wall thickness/schedule and tolerances. No dimensional standard or numerical schedule is established here, so agree the actual governing specification.
Verify material, manufacture and individual dimensions
Obtain the full ASTM A234 WPB designation, condition, traceability and material certificates. Request manufacturing evidence for seamless and forged wording. Define the smooth finish and inspection criteria without treating appearance or a generic corrosion-resistant entry as fluid-specific performance approval.
The size option is a range rather than an individual selection. Overall Length, Height and Mounting hole diameter repeat that range; they cannot determine actual elbow dimensions or prove a hole feature. Use the accepted drawing to allocate dimensions and confirm individual supply.
Approve service conditions for the piping system
Low Pressure and Not Rated provide no accepted numerical duty. Specify fluid, pressure, temperature, cycling, loads and corrosion allowance. Confirm pipe/wall compatibility, installation and attachment procedure, alignment and inspection. Agree certificates, marking and quotation scope before procurement for the actual construction project.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
